MIL-DTL-4M
3. REQUIREMENTS
3.1 First article. When specified (see 6.2), a sample pack shall be subjected to first article
inspection in accordance with 4.2.
3.2 Materials. Materials used for preservation and packing in accordance with this
specification shall be as specified herein or in referenced specifications and shall be either new or
reused. Reuse of serviceable packaging materials is permitted and shall be free from defects
affecting serviceability. All materials required to preserve and pack items under this specification
shall be of appropriate size and specified strength to contain the items and packages as applicable
(see 4.4.1).
3.2.1 Recycled, recovered, or environmentally preferable materials. Recycled, recovered,
or environmentally preferable materials should be used to the maximum extent possible provided
that the material meets or exceeds the operational and maintenance requirements, and promotes
economically advantageous life cycle costs.
3.3 Packaging. Tires and tubes shall be packaged to the level as specified (see 4.4.1 and
6.2).
3.3.1 Packaging requirements. Unless otherwise specified herein, the packaging and
inspection shall be in accordance with MIL-STD-2073-1.
3.3.2 Preservation. Preservation shall be level A or C, as specified (see 6.2).
3.3.2.1 Tires, Level A.
3.3.2.1.1 Cleaning. Tires shall be cleaned in accordance with MIL-STD-2073-1 to ensure
that all loose particles, foreign matter, and mold release agents are removed.
3.3.2.1.2 Drying. Tires shall be dried in accordance with MIL-STD-2073-1.
3.3.2.1.3 Preservative. Tires shall be preserved in accordance with A-A-52408.
3.3.2.1.4 Tires with flaps. Flaps shall be rolled and placed inside the tire. When the size
of the rolled flap and normal distance between beads assure that flap will remain in place during
normal handling and transportation, no tying is required. When the size of the rolled flap is such
that it will not be securely held within the tire, it shall be secured within the tire using twine
conforming to A-A-228 or A-A-1451, or nonmetallic strapping conforming to ASTM D3950, in
such a manner as to assure safe delivery. When it is too difficult to insert the rolled flap within the
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business